CHAPTER 10 Advanced Configuration

Bridge Configuration

BRIDGE CONFIGURATION

This feature allows you to set the bridge aging time and to enable

Spanning Tree.

The Spanning Tree Protocol (STP) can be used to detect and disable network loops, and to provide backup links between bridges. This allows a wireless bridge to interact with other bridging devices (that is, an STP- compliant switch, bridge or router) in your network to ensure that only one route exists between any two stations on the network, and provide backup links which automatically take over when a primary link goes down.

Figure 73: Bridge Configuration

The following items are displayed on this pages:

Ageing Time — Sets the MAC address ageing time, in seconds. After the aging time has been reached with no traffic received, the unit will delete the address from the forwarding database. (Default: 300 seconds)

802.1d Spanning Tree — Enables/disables the Spanning Tree Protocol on the ADSL Router. (Default: Disabled)

– 121 –

Page 121
Image 121
SMC Networks SMC7901WBRA2 B1 manual Bridge Configuration