CHAPTER 7 WLAN Configuration

Wireless Security Setup

RADIUS SERVER

Port — Specifies the port number used to communicate with the RADIUS server.

IP Address — Specifies the IP address used to communicate with the RADIUS server.

Password — Specifies the key necessary for RADIUS server authentication.

WEP KEY SETUP

The following page describes the WEP key setup.

Figure 42: Wireless Security Setup - WEP Key Setup

The following items are displayed on this page:

SSID Type — Selects the VAP to configure the WEP security settings to.

Authentication Type — Selects the authentication type to use. Options are:

Open System: If you don’t set up any other security mechanism on the access point, the network has no protection and is open to all users. This is the default setting.

Shared Key: Sets the access point to use WEP shared keys. If this option is selected, you must configure at least one key on the access point and all clients.

– 80 –

Page 80
Image 80
SMC Networks SMC7901WBRA2 B1 manual Radius Server, WEP KEY Setup