C
HAPTER
5
| WAN Configuration
Channel Configuration
– 60 –
CURRENT ATM VC
TABLE
The Current ATM VC Table is a display only table of the configured
parameters used to communincate with the remote ATM switch.
◆Select — Selects the configured connection.
◆Inf — Displays a virtual interface.
◆Mode — Displays the channel mode employed by the link.
◆VPI — Displays the virtual path identifyer (VPI) of the link.
◆VCI — Displays the virtual vircuit identifyer (VCI) of the link.
◆Encapt — Displays the encapsulation used.
◆NAPT — Displays the network address port translation (NAPT).
◆IP Addr — Displays the IP address of the link.
◆Remote IP — Displays the remote IP address of the link.
◆Subnet Mask — Displays the subnet mask.
◆User Name — Displays the user name.
◆DRoute — Dipslays if a default route (DRoute) has been enabled.
◆Status — Displays if the link is enabled or disabled.
◆Actions — Gives the options to edit the link information using the
pencil icon, or delete the link using the trashcan icon.
ACTIONS - EDIT
Clicking the pencil icon in the Current ATM VC Table opens a new window
that allows you to edit some of the parameters of the preconfigured link.
The example shown below displays a bridged interface.
Figure 25: Editing a bridged entry in the Current ATM VC Table