CHAPTER 1 Introduction

Package Contents

Security — The Barricade supports security features that deny Internet access to specified users, or filter all requests for specific services the administrator does not want to serve. The Barricade’s firewall also blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. WEP (Wired Equivalent Privacy), SSID, and MAC filtering provide security over the wireless network.

Virtual Private Network (VPN) — The Barricade supports three of the most commonly used VPN protocols – PPTP, L2TP, and IPSec. These protocols allow remote users to establish a secure connection to their corporate network. If your service provider supports VPNs, then these protocols can be used to create an authenticated and encrypted tunnel for passing secure data over the Internet (i.e., a traditionally shared data network). The VPN protocols supported by the Barricade are briefly described below.

Point-to-Point Tunneling Protocol — Provides a secure tunnel for remote client access to a PPTP security gateway. PPTP includes provisions for call origination and flow control required by ISPs. L2TP merges the best features of PPTP and L2F. Like PPTP, L2TP requires that the ISP’s routers support the protocol.

IP Security — Provides IP network-layer encryption. IPSec can support large encryption networks (such as the Internet) by using digital certificates for device authentication.

PACKAGE CONTENTS

The Barricade Wireless Broadband Router package includes:

Barricade Wireless Broadband Router

RJ-45 Category 5 network cable

RJ-11 telephone cable

BT-RJ-11 telephone cable (for New Zealand and Australia only)

Splitter

Phone jack (for Australia only)

AC power adapter

Four rubber feet

Quick Installation Guide

Documentation CD

– 23 –

Page 23
Image 23
SMC Networks SMC7901WBRA2 B1 manual Package Contents