CHAPTER 7 WLAN Configuration
WDS
The following items are displayed on this page:
NOTE: The Mode of the radio, under Basic Settings, must be set to
AP+WDS before enabling WDS.
◆Enable WDS — Enables WDS bridging on the radio interface.
ADD WDS AP
Allows the user to enter up to six MAC addresses for WDS bridging.
◆Apply Changes — Adds the specified MAC address to the Current WDS AP List.
◆MAC Address — Specifies a MAC address in the format xxxxxxxxxxxx.
◆Comment — Specifies a comment to help identify the MAC address.
◆Add — Adds the user entered MAC address and Comment information to the table.
◆Reset — Clears the fields.
CURRENT WDS AP LIST
Displays the current entries in the WDS AP List.
◆MAC Address — Displays a MAC address entry.
◆Comment — Displays a useful comment that may help to identify the MAC address.
◆Select — Selects a MAC address entry.
◆Delete Selected — Deletes the selected MAC address entry.
◆Delete All — Deletes all entries from the table.
– 84 –
