COMPLIANCES
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
EC CONFORMANCE DECLARATION
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards:
◆EN 300 328 - Technical requirements for 2.4 GHz radio equipment
◆EN 301
This device is intended for use in the following European Community and EFTA countries:
◆Austria | ◆Belgium | ◆Cyprus | ◆Czech Republic | ◆Denmark |
◆Estonia | ◆Finland | ◆France | ◆Germany | ◆Greece |
◆Hungary | ◆Iceland | ◆Ireland | ◆Italy | ◆Latvia |
◆Liechtenstein | ◆Lithuania | ◆Luxembourg | ◆Malta | ◆Netherlands |
◆Norway | ◆Poland | ◆Portugal | ◆Slovakia | ◆Slovenia |
◆Spain | ◆Sweden | ◆Switzerland | ◆United Kingdom |
|
Requirements for indoor vs. outdoor operation, license requirements and allowed channels of operation apply in some countries as described below:
◆In Italy the
◆In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz band: Channel 13.
◆In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels 1 - 7.
NOTE: The user must use the configuration utility provided with this product to ensure the channels of operation are in conformance with the spectrum usage rules for European Community countries as described below.
◆This device will automatically limit the allowable channels determined by the current country of operation. Incorrectly entering the country of operation may result in illegal operation and may cause harmful interference to other systems. The user is obligated to ensure the device is operating according to the channel limitations, indoor/outdoor restrictions and license requirements for each European Community country as described in this document.
– 6 –
