
CHAPTER 5 WAN Configuration
Channel Configuration
The following items are displayed on this page:
◆Bridged Interface — Displays a virtual interface.
◆Protocol — Displays the protocol used for transmission of data packets.
◆ATM VCC — Displays the virtual channel connection (VCC) to the remote ATM switch formed by the combination of the VCI and VPI.
◆Status — Allows the user to enable or disable the link.
◆Mode — Allows the user to select the connection protocol, such as PPPoE, or disable it.
◆Apply Changes — Applies the user specified changes.
◆Return — Returns to the previous creen without making changes.
◆Undo — Undoes any changes to the connection made by the user and restores the originals.
The example below shows an IP Interface.
Figure 26: Editing an IP entry in the Current ATM VC Table
The following items are displayed on this page:
◆IP Interface — Displays the name of the virtual interface.
– 61 –