C
HAPTER
3
| Initial Configuration
Wizard
– 39 –
■1483 Router (IPoA) — Dynamic IP over ATM (IPoA).
■1483 Bridged — The Bridged RFC 1483 Encapsulated Traffic over
ATM feature allows you to send bridged RFC 1483 encapsulated
packets over ATM switched virtual circuits (SVCs).
◆Connection Type — Your connection type will also be specified by your
service provider. Choose from the following options:
■VC-Mux — Virtual circuit multiplexing (VC-Mux).
■LLC/SNAP — Logical Link Control (LLC).
◆MTU — This is a preset field and does not require configuration. For
more information see “Current ATM VC Table” on page64
◆VPI — This is a preset field and does not require configuration. For
more information see “Channel Configuration” on page 59.
◆VCI — This is a preset field and does not require configuration. For
more information see “Channel Configuration” on page 59.
◆Username — Enter the username provided by your service provider.
◆Password — Enter the password provided by your service provider.
◆Confirm Password — Re-enter your password.
◆Next — Proceeds to the next step.
STEP 2 - LAN
SETTINGS
The Step 2 page of the Wizard configures the LAN connection type for the
ADSL Router.
Figure 11: Wizard - Step 2 - LAN Settings