CHAPTER 5 WAN Configuration
Channel Configuration
◆Protocol — Displays the protocol used for transmission of data packets.
◆ATM VCC — Displays the virtual channel connection (VCC) to the remote ATM switch formed by the combination of the VCI and VPI.
◆Status — Allows the user to enable or disable the link.
◆Use DHCP — Allows the user to disable fixed IP address and use DHCP.
◆Local IP Address — Specifies a local IP address.
◆Remote IP Address — Specifies a remote IP address on the ATM server.
◆Subnet Mask — Specifies a subnet mask.
◆Default Route — Enables/disables a default route.
◆Bridge — Allows the user to select the connection protocol, such as PPPoE, or disable it.
◆MTU — Sets the maximum transmission unit (MTU), the size of the largest packet that a network protocol can transmit.
◆Apply Changes — Applies the user specified changes.
◆Return — Returns to the previous creen without making changes.
◆Undo — Undoes any changes to the connection made by the user and restores the originals.
ACTIONS - DELETE
Selecting the trashcan icon will open a window asking you to confirm if you want to delete the configured connection. Click “OK” to delete the connection, or “Cancel” to return to the previous screen.
Figure 27: Confirm Delete
– 62 –
