CHAPTER 6 LAN Configuration
DHCP Settings
◆Secondary IP Address — Specifies a secondary IP address for management of the unit.
◆DHCP Pool — Selects either the primary or secondary IP address to enable DHCP under.
◆Ethernet to Wireless Blocking — Enables/disables access to the Ethernet port by wireless clients.
DHCP SETTINGS
The ADSL Router includes a Dynamic Host Configuration Protocol (DHCP) server that can assign temporary IP addresses to any attached host requesting the service, as well as a DHCP relay serivce that will route the DHCP service to other subnets than that of the unit.
NO DHCP By selecting none, you can disable DHCP on the ADSL Router.
Figure 33: No DHCP
The following items are displayed on this page:
◆None — Disables DHCP on the unit.
– 70 –
