SMC Networks SMC7901WBRA2 B1 manual Introduction

CHAPTER 1 Introduction

Hardware Description

ETHERNET PORT The ADSL Router has one 100BASE-TX RJ-45 port that can be attached directly to 10BASE-T/100BASE-TX LAN segments.

This port supports automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs, switches, or hubs.

POWER CONNECTOR The ADSL Router has a power button. When the AC power adapter is AND BUTTON attached and connected to a power source, you must depress the power

button to power the unit.

The power adapter automatically adjusts to any voltage between 100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to the unit. No voltage range settings are required.

RESET BUTTON This button is used to restore the factory default configuration. If you hold down the button for 5 seconds or more, any configuration changes you may have made are removed, and the factory default configuration is restored to the access point.

– 28 –