C
HAPTER
7
| WLAN Configuration
WDS
– 83 –
■Disable: Disables all ACLs.
■Allow Listed: Configures an allowed list of MAC addresses. Those
MAC addresses not in the allowed list will not be allowed to connect
to the wireless interface.
■Deny Listed: Configures a denied list of MAC addresses. The MAC
addresses specified will not be allowed to connect to the wireless
interface.
◆MAC Address — The specified MAC address in the ACL Allowed or
Denied list.
◆Select — Selects a MAC address from the list.
◆Delete Selected — Deletes a selected MAC address.
◆Delete All — Deletes all entries from the ACL table.
WDS
Each access point radio interface can be configured to operate as a bridge,
which allows it to forward traffic directly to other access point units. To set
up bridge links between access point units, you must configure the wireless
Distribution System (WDS) forwarding table by specifying the wireless MAC
address of all units to which you want to forward traffic. Up to six WDS
bridge links can be specified for each unit in the wireless bridge network.
Figure 45: Wireless Security Setup - Wireless Distribution System (WDS)