C
HAPTER
5
| WAN Configuration
ATM Settings
– 63 –
AUTO PVC SETTINGS The Auto PVC Settings table allows the user to enable auto PVC searching
and to add, or delete VPI and VCI entries to the Current Auto-PVC Table.
Figure 28: Auto PVC Settings
The following items are displayed on this page:
◆Enable Auto PVC Search — Enables/disables auto PVC searching.
◆VPI — Adds a VPI entry to the table.
◆VCI — Adds a VCI entry to the table.
ATM SETTINGS
The ATM Settings page is used to configure the settings between your
ADSL Router and the remote ATM PVC switch, including connection mode
(single or multiple service over one connection), and packet level QoS.
The ATM Settings parameters form a Traffic Contract that informs the
network what type of traffic is to be transported and the performance
requirements of the traffic.
Figure 29: ATM Settings