WEB INTERFACE

 

 

Parameter

Default

Description

IP Address

10.1.0.1

IP address of the switch you are

 

 

managing. The switch supports

 

 

SNMP over UDP/IP transport

 

 

protocol. In this environment, all

 

 

systems on the Internet, such as

 

 

networkinterconnectiondevicesand

 

 

any PC accessing the switch are

 

 

assigned an IP address. Valid IP

 

 

addresses consist of four decimal

 

 

numbers, of 0 to 255, separated by

 

 

periods. Anything outside of this

 

 

format will not be accepted by the

 

 

configuration program.

Subnet Mask

255.255.0.0

Subnet mask of the switch. This

 

 

mask identifies the host address bits

 

 

used for routing to specific subnets.

Gateway IP

0.0.0.0

The gateway that the switch’s agent

Address

 

uses to pass data to the management

 

 

station. Note that the gateway must

 

 

bedefinedifthemanagementstation

 

 

is located in a different IP segment.

MAC Address

 

Physical address of the switch.

Maximum

4

Sets the number of concurrent

Number of

 

Telnet sessions allowed to access the

Telnet sessions

 

switch.

3-12

Page 108
Image 108
SMC Networks SMC8606T manual Parameter Default Description