SMC Networks SMC8606T manual Port Priority Configuration

CONSOLE INTERFACE

Port Priority Configuration

The default priority for all ingress ports is zero. Therefore, any inbound frames that do not have priority tags will be placed in the low priority output queue. Default priority is only used to determine the output queue for the current port; no priority tag is actually added to the frame. You can use the 802.1P Port Priority Configuration menu to adjust default priority for any port as shown below:

SMC TigerSwitch 1000 Local Management -- SMC8606T

< 802.1P Port Priority Configuration >

Port	Default Ingress	Number of Egress
	User Priority	Traffic Class
-----------------------------------------------
1	0	2
2	0	2
3	0	2
4	0	2
5	0	2
6	0	2
7	0	2
8	0	2
<APPLY>	<OK>	<CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter	Description
Port	Numeric identifier for switch port.
Default Ingress	Default priority can be set to any value from 0~7,
User Priority	where 0~3 specifies the low priority queue and
	4~7 specifies the high priority queue.
Number of Egress	Indicates that this switch supports two priority
Traffic Classes	output queues.

2-55