SMC Networks SMC8606T manual Changing the Network Configuration, Http

CONSOLE INTERFACE

Changing the Network Configuration

Use the Network Configuration menu to set the bootup option, configure the switch’s Internet Protocol (IP) parameters, enable the on-board Web server, or to set the number of concurrent Telnet sessions allowed. The screen shown below is described in the following table.

SMC TigerSwitch 1000 Local Management -- SMC8606T

< Network Configuration >

IP Configuration

IP Connectivity Test(Ping)

HTTP Configuration

MAX Number of allowed Telnet sessions (1-4) : 4

Physical Address : 00-00-11-11-43-21

<APPLY>	<OK>	<CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select.

Parameter	Description
IP Configuration	Screen used to set the bootup option, or configure
	the switch’s IP parameters.
IP Connectivity	Screen used to test IP connectivity to a (Ping)
Test	specified device.
HTTP	Screen used to enable the Web server.
Configuration
MAX Number of	The maximum number of Telnet sessions allowed
Allowed Telnet	to simultaneously access the switch.
Sessions
Physical Address	MAC address of the switch.

2-11