SMC Networks SMC8606T manual Port Trunking

CONSOLE INTERFACE

You can use the Port Trunking Configuration screen to set up port trunks as shown below. Remember that you must “Enable” a new configuration before it will take effect.

	SMC TigerSwitch 1000 Local Management -- SMC8606T
	< Port Trunking		Configuration >
Trunk ID	Status	1	Member List		3	4
---------	--------		2
		-----------	-----------	-----------		-----------
--	--------	Port : --	Port : --		Port : --	Port : --
--	--------	Port : --	Port : --		Port : --	Port : --
--	--------	Port : --	Port : --		Port : --	Port : --
Trunk ID : 1			Trunk ID : 1		Member Port : 1
[Show]	[More]		[Add]	[Delete]
[Enable]	[Disable]
			<OK>
Use <TAB> or arrow keys to move, other keys to make changes.

Parameter	Description
Trunk ID	Configure up to four trunks per switch (ID of 1~4).
Port	Select from 2~4 ports per trunk.
[Show]	Displays trunk settings, where the first trunk listed
	is specified by “Sorted by Trunk ID.”
[More]	Scrolls through the list of configured trunks.
[Enable] [Disable]	Enables/disables the selected trunk.

2-46