CONSOLE INTERFACE
Displaying the Unicast Address Table
The Address Table contains the MAC addresses and VLAN identifier associated with each port (that is, the source port associated with the address and VLAN), sorted by MAC address or VLAN ID. You can search for a specific address, clear the entire address table, or information associated with a specific address, or set the aging time for deleting inactive entries. The information displayed in the Address Table is indicated in the following figure and table.
SMC TigerSwitch 1000 | Local Management |
|
| |||||
|
| < Unicast | Address Table > |
|
|
|
| |
Aging Time : 300 | Dynamic Counts | : 146 | Static Counts : 0 |
| ||||
MAC | VID | Port Status | MAC |
| VID | Port Status | ||
D | ||||||||
8 | D | 8 | ||||||
8 | D | 8 | D | |||||
8 | D | 8 | D | |||||
8 | D | 8 | D | |||||
8 | D | 1 | 8 | D | ||||
1 | 8 | D | 1 | 8 | D | |||
1 | 8 | D | 1 | 8 | D | |||
1 | 8 | D | 1 | 8 | D | |||
Sorted by : | MAC + VID | Cleared by : | MAC + VID | ||
VLAN ID | : | 1 | VLAN ID | : | 1 |
MAC | : | MAC | : | ||
[Show] |
| [More] | [Clear] |
| [Clear Dynamic] |
<APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, | other keys to make changes. | |
Parameter | Description |
Aging Time | |
| dynamically learned forwarding information. |
| Range: 10 - 65534 seconds; Default: 300 seconds |
Dynamic Counts | The number of dynamically learned addresses in |
| the table. |
Static Counts | The number of static addresses in the table. |
MAC | The MAC address of a node. |
VID | The VLAN(s) associated with this address or port. |
