CONSOLE INTERFACE
Configuring Bridge STA
The following figure and table describe Bridge STA configuration.
| SMC TigerSwitch 1000 Local Management | ||
| < Spanning Tree Bridge Configuration > | ||
| Spanning Tree Protocol | : On | |
| Bridge Priority | : 32768 | |
| Hello Time (in seconds) | : 2 | |
| Max Age (in seconds) | : 20 | |
| Forward Delay (in seconds) | : 15 | |
| <APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, <Space> | to scroll options. | ||
|
|
|
|
Parameter | Default | Description |
|
Spanning | On | Enable this parameter to participate in an | |
Tree |
| ||
Protocol |
|
|
|
Priority | 32,768 | Device priority is used in selecting the root | |
|
| device, root port, and designated port. The | |
|
| device with the highest priority becomes the | |
|
| STA root device. However, if all devices |
have the same priority, the device with the lowest MAC address will then become the root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value, the higher the priority.