CONSOLE INTERFACE
Configuring Static Unicast Addresses
Use the Static Unicast Address Table Configuration screen to manually configure host MAC addresses in the unicast table. You can use this screen to associate a MAC address with a specific VLAN ID and switch port as shown below.
| SMC TigerSwitch 1000 Local Management | ||||
| < Static Unicast Address Table | Configuration > | |||
VID | MAC Address |
| Port | Status | |
Sorted | by : VID + MAC | VID | : | 1 | MAC : |
VID | : 1 | Port | : | 1 |
|
MAC | : | Status | : | Permanent | |
[Show] [More][Set]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter | Description |
VID | The VLAN group this port is assigned to. |
MAC Address | The MAC address of a host device attached to this |
| switch. |
Port | The port the host device is attached to. |
