CONSOLE INTERFACE

Configuring Broadcast Storm Control

Use the Broadcast Storm Control Configuration screen to enable broadcast storm control for any port on the switch, as shown below.

SMC TigerSwitch 1000

Local Management -- SMC8606T

< Broadcast Storm

Control Configuration >

Broadcast control on all ports :

[Enable] [Disable]

Port

Threshold

Broadcast Control

-------------------------------------------------------

1

500

 

ENABLED

2

500

 

ENABLED

3

500

 

ENABLED

4

500

 

ENABLED

5

500

 

ENABLED

6

500

 

ENABLED

7

500

 

ENABLED

8

500

 

ENABLED

<APPLY>

 

<OK>

<CANCEL>

Use <TAB> or arrow keys to move. <Enter> to select

Parameter

Description

 

Broadcast control on

Allows you to enable/disable broadcast storm

all ports

control for all ports on the switch.

Threshold

The packet-per-second threshold for broadcast

 

packets on the port.

 

 

(Default is 500 pps.)

 

Broadcast Control

Enables/disables broadcast control for the port.

 

When enabled, the switch will employ a

 

broadcast-control mechanism if the

packet-per-second threshold is exceeded. This mechanism limits the amount of broadcasts passed by the port to half of the received packet-per-second count. The control mechanism remains in effect until the number of received broadcasts falls back below the packet-per-second threshold. (Default is Enabled.)

2-49

Page 65
Image 65
SMC Networks SMC8606T manual Configuring Broadcast Storm Control