SMC Networks SMC8606T manual Configuring the Serial Port

CONSOLE INTERFACE

Configuring the Serial Port

You can access the on-board configuration program by attaching a VT100 compatible device to the switch’s serial port. (For more information on connecting to this port, see “Required Connections” on page 1-2.) The communication parameters for this port can be accessed from the Serial Port Configuration screen shown below and described in the following table.

SMC TigerSwitch 1000 Local Management -- SMC8606T

< Serial Port Configuration >

Management Mode	: CONSOLE MODE
Baud rate	: 19200
Data bits	: 8
Stop bits	: 1
Parity	: NONE
Time-Out (in minutes)	: 10

	<APPLY>	<OK>	<CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter	Default	Description
Management	Console	Indicates that the console port
Mode	Mode	settings are for direct console
		connection.
Baud Rate	19200	The rate at which data is sent between
		devices.
		Options : 2400, 4800, 9600, 19200 bps,
		and Auto detection
Data bits	8 bits	Sets the data bits of the RS-232 port.
		Options : 7, 8

2-16