SMC Networks SMC8606T manual Configuring the Serial Port

WEB INTERFACE

Configuring the Serial Port

If you are having difficulties making an out-of-band console connection to the serial port on the switch, you can display or modify the current settings for the serial port through the Web agent. Click on the serial port icon in the switch image to display or configure these settings, as shown below.

Parameter	Default	Description
Baud Rate	19200	The rate at which data is sent between devices.
		Options : 2400, 4800, 9600, 19200 bps, and Auto
		detection.
Time-Out	10 minutes	If no input is received from the attached device
		after this interval, the current session is
		automatically closed.
		Range : 0 - 100 minutes; where 0 indicates
		disabled
Data Bits	8 bits	Sets the data bits of the RS-232 port.
		Options : 7, 8
Stop Bits	1 bit	Sets the stop bits of the RS-232 port.
		Options : 1, 2
Parity	None	Sets the parity of the RS-232 port.
		Options : none/odd/even
Auto Refresh	5 second	Sets the interval before a console session will
Time		auto refresh the console information, such as
		Spanning Tree Information, Port Configuration,
		Port Statistics, and RMON Statistics.
		Range : 0, or 5-255 seconds; where 0 indicates
		disabled

3-6