WEB INTERFACE
System Information
Use the System Information screen to display descriptive information about the switch, or for quick system identification as shown in the following figure and table.
Parameter Description
System Name1 IP Address2
Name assigned to the switch system.
IP address of the switch you are managing. The switch’s management supports SNMP over UDP/IP transport protocol. In this environment, all systems on the Internet, such as network interconnection devices and any PC accessing the switch must have an IP address. Valid IP addresses consist of four decimal numbers, of 0 to 255, separated by periods. Anything outside of this format will not be accepted by the configuration program.
Object ID | MIB II object identifier for switch’s network |
| management subsystem. |
Location1 | Specifies the areaorlocation wherethesystem resides. |
Contact1 | Contact person for the system. |
System Up Time | Length of time the current management software has |
| been running. |
1Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to browse the whole string.
2The default value is 10.1.0.1
