CONSOLE INTERFACE
Assigning SNMP Parameters
Use the SNMP Configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP). The switch includes an SNMP agent which monitors the status of its hardware, as well as the traffic passing through its ports. A computer attached to the network, called a Network Management Station (NMS), can be used to access this information. Access rights to the switch are controlled by community strings. To communicate with the switch, the NMS must first submit a valid community string for authentication. The options for configuring community strings and related trap functions are described in the following sections.
SMC TigerSwitch 1000 Local Management
< SNMP Configuration >
Send Authentication Fail Traps : ENABLED
SNMP Security
IP Trap Managers
<APPLY> | <OK> | <CANCEL> |
Use <TAB> or | arrow keys to move, <Space> to scroll options. | |
|
|
|
Parameter | Description |
Send | Issue a trap message to specified IP trap managers |
Authentication | whenever authentication of an SNMP request fails. |
Fail Traps | (The default is enabled.) |
SNMP Security | Assigns SNMP access based on specified strings. |
IP Trap Managers | Specifies management stations that will receive |
| authentication failure messages or other trap |
| messages from the switch. |