SMC Networks SMC8606T manual Configuring the Switch

CONSOLE INTERFACE

Configuring the Switch

The Switch Configuration Menu is used to control a broad range of functions, including port configuration, Spanning Tree support for redundant switches, port mirroring, multicast filtering, and Virtual LANs. Each of the setup screens provided by these configuration menus is described in the following sections.

SMC TigerSwitch 1000 Local Management -- SMC8606T

< Switch Configuration			Menu >
Port Configuration	Extended Bridge Configuration
Port State	802.1P	Configuration
Spanning Tree Configuration	802.1Q	VLAN	Base Information
Spanning Tree Information	802.1Q	VLAN	Current Table Information
Mirror Port Configuration	802.1Q	VLAN	Static Table Configuration
Port Trunking Configuration	802.1Q	VLAN	Port Configuration
IGMP Configuration	Port GARP Configuration
BStorm Control Configuration	Port GMRP Configuration
Port Security Configuration

<OK>

Use <TAB> or arrow keys to move. <Enter> to select.

Selection	Description
Port Configuration	Sets communication parameters for ports.
Port State	Displays current port settings and port status.
Spanning Tree	Configures the switch and its ports to participate in
Configuration	a local Spanning Tree.
Spanning Tree	Displays the current Spanning Tree configuration
Information	for the switch and its ports.
Mirror Port	Sets the source and target ports for mirroring.
Configuration
Port Trunking	Specifies ports to group into aggregate trunks.
Configuration

2-27