WEB INTERFACE
Main Menu
Using the onboard Web agent, you can define system parameters, manage and control the switch, and all its ports, or monitor network conditions. The interface screen includes the main menu on the left side, the menu bar beneath the image of the switch, and a list of commands beneath the menu bar. The following table briefly describes the selections available from this program.
Function | Description |
System | Provides basic system description, including contact |
| information. |
Switch | Shows hardware/firmware version numbers and power |
| status of the switch. |
IP | Includes boot state, IP address, and Telnet session count. |
SNMP | Configures communities and trap managers; and |
| activates traps. |
Security | Sets password for system access. |
Upgrade | Downloads new version of firmware to update your |
| system. |
Configure | Saves the switch configuration to a file on a TFTP server. |
| This file can be later downloaded to restore the |
| configuration |
Address Table | Provides full listing or unicast addresses, sorted by |
| address or VLAN. |
STA | Enables Spanning Tree Algorithm; also sets parameters |
| for switch priority, hello time, maximum message age, |
| and forward delay; as well as port priority and path cost. |
Bridge | Displays/configures extended bridge capabilities |
Extension | provided by this switch, including support for traffic |
| classes, GMRP multicast filtering, and VLAN |
| extensions. |
Priority | Configures default port priorities and queue |
| assignments. |
