CONSOLE INTERFACE
Viewing the Current Port Configuration
The Port State screen displays the port type, status, link state, and flow control in use, as well as the communication speed and duplex mode. To change any of the port settings, use the Port Configuration menu.
| SMC8606T | ||||
|
|
| < Port State > |
| |
Port | Type | Operational | Link | FlowControl | Speed and |
|
|
|
| InUse | Duplex InUse |
1 | 1000T | YES | DOWN | ||
2 | 1000T | YES | DOWN | ||
3 | 1000T | YES | UP | 100_FULL | |
4 | 1000T | YES | DOWN | ||
5 | 1000T | YES | DOWN | ||
6 | 1000T | YES | DOWN | ||
7 | GBIC | YES | DOWN | ||
8 | GBIC | YES | DOWN | ||
|
|
| <OK> |
|
|
| Use <TAB> or arrow keys to move. <Enter> to select. | ||||
Parameter | Description |
|
| ||
Type |
| Shows port types as: |
| ||
|
| 1000T - |
| ||
|
| 1000SX - |
| ||
|
| GBIC - | |||
Operational | Shows if the port is functioning or not. | ||||
Link |
| Indicates if the port has a valid connection to an | |||
|
| external device. |
|
| |
FlowControl | Shows the flow control type in use. Flow control | ||||
InUse |
| can eliminate frame loss by “blocking” traffic from | |||
|
| end stations connected directly to the switch. Back |
pressure is used for half duplex and IEEE 802.3x for full duplex.