C
ONSOLE
I
NTERFACE
2-59
802.1Q VLAN Current Table Information
This screen shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a
large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based
VLAN for one or two switches, you can assign ports to the same
untagged VLAN (page 2-61). The current configuration is shown in
the following figure.
Parameter Description
Deleted VLAN Entry
Counts
The number of times a VLAN entry has been
deleted from this table.
VID The ID for the VLAN currently displayed.
Creation Time The value of sysUpTime (System Up Time)
when this VLAN was created.
SMC TigerSwitch 1000 Loc al Management -- SMC8606T
< 802.1Q VLAN Current Table Information >
Deleted VLAN Entry Counts : 0
VID Creation Time Status
----------------------------------- -----------------------------
1 0 (0 day 0 hr 0 min 0 sec) Permanent
Current Egress Ports C urrent Untagged Ports
11111111 11111111
Sorted by VID : 1
[Show] [More]
<OK>
Use <TAB> or arrow keys to m ove. <Enter> to select
Port 1 Port 8