WEB INTERFACE
IP Configuration
Use the IP Configuration screen to set the bootup option, configure the Ethernet IP address for the switch, or set the number or concurrent Telnet sessions allowed. The screen shown below is described in the following table.
Parameter | Default | Description |
IP State | USER- | Specifies whether IP functionality is |
| CONFIG | enabledviamanualconfiguration,or |
|
| set by Boot Protocol (BootP). |
|
| Options include: |
|
| BOOTP Get IP - IP is enabled but |
|
| will not function until a BootP reply |
|
| has been received. BootP requests |
|
| will be periodically broadcast by the |
|
| switch in an effort to learn its IP |
|
| address. (BootPvaluesincludetheIP |
|
| address,defaultgateway,andsubnet |
|
| mask.) |
|
| |
|
| enabled based on the default or user |
|
| specified IP Configuration. (This is |
|
| the default setting.) |
