SMC Networks SMC8606T manual Chapter Console Interface, Log-in Screen

CHAPTER 2

CONSOLE INTERFACE

Log-in Screen

Once a direct connection to the serial port or a Telnet connection is established, the log-in screen for the onboard configuration program appears as shown below.

SSSSSSSSSSSSSSS		MMMMM		MMMMM		CCCCCCCCCCCCCC
SSSSSSSSSSSSSSSSS		MM			MM	CCCCCCCCCCCCCCCC
SS	S	MMM			MMM	CCC	CC
SS		MMMM		MMMM		CCC
SSSSSSSSSSSSSSSS		MM MM		MM	MM	CCC	CC
S	SS	MM	MM MM		MM	CCC
	SS	MM	MM MM		MM	CCC	CC
SSSSSSSSSSSSSSSSS		MM	MMM		MM	CCCCCCCCCCCCCCCC
SSSSSSSSSSSSSSS		MMMM	MMMMM		MMMM	CCCCCCCCCCCCCC
V2.04.03.07	TigerSwitch 1000				SMC8606T
	08-01-2001		(c)Copyright 2001, SMC Networks Inc.
	User name			:
	Enter Password			:

If this is your first time to log into the configuration program, then the default user names are “admin” and “guest,” with no password. The administrator has Read/Write access to all configuration parameters and statistics. While the guest has Read Only access to the management program.

You should define a new administrator password, record it and put it in a safe place. Select Console Login Configuration from the Management Setup Menu and enter a new password for the administrator. Note that passwords can consist of up to 11 alphanumeric characters and are not case sensitive.

2-1