WEB INTERFACE
Port Menus
Port Information
The Port Information screen displays the port status, link state, the communication speed and duplex mode, as well as the flow control in use. To change any of the port settings, use the Port Configuration menu. The parameters shown in the following figure and table are for the
Parameter | Description |
Admin Status | Shows if the port is enabled or not. |
Link Status | Indicates if the port has a valid connection to an |
| external device. |
Speed Status | Shows the port speed (1000M, 100M, or 10M). |
Duplex Status | Displays the current duplex mode. |
Flow Control Status | Shows the flow control type in use. Flow control can |
| eliminate frame loss by “blocking” traffic from end |
| stations connected directly to the switch. Back pressure |
| is used for half duplex and IEEE 802.3x for full duplex. |
Note: The port information displayed is not valid if the link status is down.
Port Configuration
Use the Port Configuration menus to configure any port on the
