| CONSOLE INTERFACE |
Parameter | Description |
Static Entry | Indicates that the switch allows static filtering for |
Individual Port | unicast and multicast addresses. (Refer to Network |
| Monitor Menu / Static Unicast Address Table |
| Configuration and Static Multicast Address Table |
| Configuration.) |
VLAN Learning | This switch uses Shared VLAN Learning (SVL), |
| whereby all ports share the same VLAN filtering |
| database. |
Configurable | Indicates that the switch allows you to override the |
PVID Tagging | default PVID setting (Port VLAN ID used in frame |
| tags) and its egress status |
| Untagged) on each port. (Refer to 802.1Q VLAN |
| Port Configuration.) |
Local VLAN | This switch does not support multiple local |
Capable | bridges (that is, multiple Spanning Trees). |
Bridge Settings |
|
Traffic Class* | Multiple traffic classes are supported by this switch |
| as indicated under Bridge Capabilities. However, |
| you can disable this function by setting this |
| parameter to False. |
GMRP* | GARP Multicast Registration Protocol (GMRP) |
| allows network devices to register endstations |
| with multicast groups. |
| The Internet Group Management Protocol (IGMP) |
| is currently used by this switch to provide |
| automatic multicast filtering. |
GVRP* | GARP VLAN Registration Protocol (GVRP) defines |
| a way for switches to exchange VLAN information |
| in order to register necessary VLAN members on |
| ports across the network. This function should be |
| enabled to permit VLANs groups which extend |
| beyond the local switch. |
* Not implemented in the current firmware release.
