SMC Networks SMC8606T manual Configuring Port Parameters, Disabled, Enabled

CONSOLE INTERFACE

Configuring Port Parameters

Use the Port Configuration menus to set or display communication parameters for any port on the switch.

	SMC TigerSwitch 1000 Local Management -- SMC8606T
		< Port Configuration >
Flow Control mode of all ports : [Enable]				[Disable]
Port	Type	Admin	Flow Control	Speed and Duplex
-------------------------------------------------------------------
1	1000T	ENABLED	DISABLED	AUTO
2	1000T	ENABLED	DISABLED	AUTO
3	1000T	ENABLED	DISABLED	AUTO
4	1000T	ENABLED	DISABLED	AUTO
5	1000T	ENABLED	DISABLED	AUTO
6	1000T	ENABLED	DISABLED	AUTO
7	GBIC	ENABLED	DISABLED	AUTO
8	GBIC	ENABLED	DISABLED	AUTO

<APPLY>	<OK>	<CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter	Default	Description
Flow Control	DISABLED	Allows you to enable or disable flow
mode of all ports		control for all ports on the switch.
Type		Shows port types as:
		1000T - 1000BASE-T
		1000SX - 1000BASE-SX
		GBIC - 1000BASE-SX or
		1000BASE-LX transceiver
Admin	ENABLED	Allows you to disable a port due to
		abnormal behavior (e.g., excessive

collisions), and then re-enable it after the problem has been resolved. You may also disable a port for security reasons.

2-29