SMC Networks SMC8606T manual Configuring Bridge MIB Extensions, Bridge Capability

WEB INTERFACE

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support Traffic Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the Extended Bridge Configuration screen as shown below:

Bridge Capability

Parameter	Description
Extended Multicast	Indicates that the switch does not support the filtering
Filtering Services	of individual multicast addresses based on GMRP
	(GARP Multicast Registration Protocol). Note that this
	function is not implemented in the current firmware
	release.
Traffic Classes	Indicates that the switch provides mapping of user
	priorities to multiple traffic classes. (Refer to the
	Priority menu on page 3-34.)
Static Entry	Indicates that the switch allows the static filtering of
Individual Port	unicast and multicast addresses. (Refer to the Address
	Table Configuration on page 3-19.)
VLAN Learning	This switch uses Shared VLAN Learning (SVL),
	whereby all ports share the same VLAN filtering
	database.
Configurable	Indicates that the switch allows you to override the
PVID Tagging	default PVID setting (Port VLAN ID used in frame
	tags) and its egress status (VLAN-Tagged or
	Untagged) on each port. (Refer to VLAN Port
	Configuration on page 3-41.)

Local VLAN Capable This switch does not support multiple local bridges (that is, multiple Spanning Trees).

3-32