SMC Networks SMC8606T manual User, Config

		CONSOLE INTERFACE
Parameter	Default	Description
Subnet	255.255.0.0	Subnet mask of the switch. This mask
Mask		identifies the host address bits used for
		routing to specific subnets.
Default		The gateway that the switch’s agent uses
Gateway		to pass data to the management station.
		Note that the gateway must be defined if
		the management station is located in a
		different IP segment.
IP State	USER-	Specifies whether IP functionality is
	CONFIG	enabled via manual configuration, or set
		by Boot Protocol (BootP). Options
		include:
		USER-CONFIG -IP functionality is
		enabled based on the default or user
		specified IP configuration.
		BOOTP-GET-IP - IP is enabled but will
		not function until a BootP reply has been
		received. BootP requests will be
		broadcast 10 times, once every second, in
		an effort to learn its IP address. If no
		response is received, the switch will use
		the default IP setting in NVRAM. (BootP
		values can include the IP address, default
		gateway, and subnet mask.)

2-13