CONSOLE INTERFACE
Downloading System Software
Using TFTP Protocol to Download Over the Network
Use the TFTP Download menu to load software updates into the switch. The download file should be an SMC8606T binary file from SMC; otherwise the switch will not accept it. The success of the download operation depends on the accessibility of the TFTP server and the quality of the network connection. After downloading the new software, the switch will automatically restart itself. Parameters shown on this screen are indicated in the following figure and table.
SMC TigerSwitch 1000 Local Management
<TFTP Download New Software > Download Server IP :
Agent Software Upgrade | : ENABLED | |
Download | Filename | : |
Download | Mode | : PERMANENT |
[Process | TFTP Download] |
| |
Download | status : Complete |
| |
<APPLY> |
| <OK> | <CANCEL> |
Use <TAB> or | arrow keys to move, other keys to make changes. | ||
|
|
|
|
Parameter | Description |
Download Server | IP address of a TFTP server. |
IP |
|
Agent Software | Indicates that the switch is enabled for software |
Upgrade | upgrades. |
Download | The binary file to download to the switch. |
Filename |
|
Download Mode | Downloads to permanent flash ROM. |
[Process TFTP | Issues a request to the TFTP server to download |
Download] | the specified file. |
