WEB INTERFACE
Firmware Upgrade Options
You can upgrade system firmware by performing a Web upload or a TFTP download. Note that you can also upgrade by a direct connection to the console port (see “Upgrading Firmware via the Serial Port” on page
Web Upload Management
Use the Web Upload Management menu to load software updates into the switch. The upload file should be an SMC8606T binary file from SMC; otherwise the switch will not accept it. The success of the upload operation depends on the quality of the network connection. After uploading the new software, the switch will automatically restart itself. Parameters shown on this screen are indicated in the following figure and table.
Parameter | Description |
Upload Mode | Uploads to permanent flash ROM. |
File Name | The binary file to download. Use the browse button |
| to locate the file on your local network. |
Start Web Upload | Starts uploading the file over the network. |
