7-2-2 Selecting the Display Items
To select the items to be displayed on the viewfinder screen from the VF DISP 1 and VF DISP 2 pages of the USER menu, turn on or off the indication next to each item.
To select the items to be displayed on the viewfinder screen, proceed as follows.
CANCEL/PRST /
ESCAPE switch
MENU knob | MENU ON/OFF switch |
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the viewfinder screen.
2 Turn the MENU knob until the VF DISP 1 or VF DISP 2 page appears, and press the MENU knob to select the page.
|
|
|
|
|
|
|
|
| U04 |
| VF | DISP 1 |
|
|
|
| VF | DISP |
| : | ON |
| |
| VF | DISP | MODE | : | 3 |
| |
| DISP | EXTENDER | : | ON |
| ||
| DISP | FILTER | : | ON |
| ||
| DISP | WHITE | : | ON |
| ||
| DISP | GAIN | : | ON |
| ||
| DISP | SHUTTER | : | ON |
| ||
| DISP | AUDIO | : | ON |
| ||
| DISP | DISC | : | ON |
| ||
| DISP | IRIS | : | ON |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VF DISP 1 page
You can select the following items to be displayed on the screen on the VF DISP 1 or VF DISP 2 page.
VF DISP 1 page
Item | Description |
|
|
VF DISP | Turning on or off the viewfinder |
| display 1) |
VF DISPLAY MODE | Selecting the display mode 2) |
DISP EXTENDER | Extender indicator |
|
|
DISP FILTER | Types of the ND filter |
|
|
DISP WHITE | White balance memory indicator |
|
|
DISP GAIN | Gain indicator |
|
|
Item | Description |
|
|
DISP SHUTTER | Shutter speed and ECS mode |
| indicator |
|
|
DISP AUDIO | Audio level indicator |
|
|
DISP DISC | Remaining disc capacity indicator |
|
|
DISP IRIS | Iris opening indicator |
|
|
1)The viewfinder display can be also turned on or off by using the DISPLAY switch on the viewfinder.
2)For detailed information on the display mode, see
VF DISP 2 page
Item | Description |
|
|
DISP ZOOM | Zoom position indicator |
|
|
DISP COLOR | Displays the color temperature. |
TEMP. |
|
|
|
DISP BATT | Displays the battery voltage/ |
REMAIN1) | remaining capacity of an internal |
| battery pack or an external battery |
| connected to the DC IN connector. |
|
|
DISP DC IN | Displayed when the power is supplied |
| from an external battery connected to |
| the DC IN connector. |
|
|
DISP 16:9/4:3 ID | Displays the 16:9/4:3 mode indicator. |
|
|
DISP WRR RF LVL | Displays the reception level of the |
| wireless microphone. |
|
|
DISP TIME CODE | Displays the time code. |
|
|
DISP REC FORMAT | Displays the recording format. |
|
|
1)When an Anton Bauer battery system or a
INT: When one of the above batteries is installed, the remaining power is shown as a percentage value (%) when there is a change in the value or when the power is low.
AUTO: The remaining power is shown as a percentage value (%) when one of the above batteries is installed. Otherwise the voltage (VOLT) is displayed continuously.
VOLT: The voltage (VOLT) is displayed continuously.
3 Turn the MENU knob to move the b mark to the item you want to set, and press the MENU knob.
The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.
4 Turn the MENU knob to select whether the selected item should appear in the viewfinder display (the “ON” setting), or not appear (the “OFF” setting), and press the MENU knob.
The z mark changes to a b mark and the ? mark changes to a z mark.
Note that pressing the CANCEL/PRST / ESCAPE switch to CANCEL/PRST on this page has no effect.
Settings Detailed and Displays Menu 7 Chapter
123 | |
|
|