Selection Scene 4 Chapter
1 Carry out steps 1 to 4 of
2 Turn the SEL/SET dial or the MENU knob to select TRIM, and press the dial/knob.
The first frame of the selected sub clip appears. In this state, you can carry out playback and search all clips on the disc.
To cancel the trim and return to the previous screen
Hold down the SHIFT button and press the SEL/SET dial or MENU knob.
3 Carry out playback and search to find the new location of the IN point or OUT point of the selected sub clip.
4 At the point where you want to set the new IN point or OUT point, turn the SEL/SET dial or the MENU knob to select the IN (when changing the IN point) or the OUT (when changing the OUT point), and press the dial/knob.
To change both the IN point and the OUT point,
repeat steps 3 and 4.
To reset the IN point or OUT point, selecting IN or OUT, hold down the RESET button and press the SEL/SET dial. The IN or OUT point is restored to the value it had before the sub clip trim screen opened.
To cue up the IN point or OUT point, hold down the SHIFT button and press the NEXT or PREV button.
When you set IN and OUT points stretching across several clips, one sub clip is created for each of the clips.
Note
You can press the THUMBNAIL button to return to
5 When the new IN and/or OUT points are set, hold down the SHIFT button and press the SEL/SET dial or MENU knob.
This carries out the trimming, and the screen returns to the sub clip thumbnail display.
To cancel the trim operation
Reset the IN point and the OUT point to return to the state before the sub clip trimming screen was displayed, then hold down the SHIFT button and press the SEL/SET dial.
This cancels the trim, and the screen returns to the sub clip thumbnail display.
6 Save the current clip list to disc.
See
4-2-4 Deleting a Sub Clip
Proceed as follows.
1 Carry out steps 1 to 4 in the procedure,
2 Turn the SEL/SET dial or the MENU knob to select DELETE, and press the dial/knob.
The sub clip deletion screen appears.
76