By pushing the STATUS ON/SEL / OFF switch up to ON/SEL, the confirmation window appears. Each time you push this switch up to ON/SEL, the window switches. After 10 seconds, the window disappears automatically.
To make the window disappear promptly after displaying the window, push this switch down to OFF.
To disable display of the status confirmation windows
Proceed as follows.
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2 Turn the MENU knob until the SET STATUS page appears, and press the MENU knob to select the page.
U13 SET STATUS |
|
| |
STATUS | ABNORMAL | : | ON |
STATUS | FUNCTION | : | ON |
STATUS | AUDIO | : | ON |
Item | Description |
|
|
ABNORMAL | Selects whether or not the ABNORMAL |
| window is displayed (ON or OFF). |
|
|
FUNCTION | Selects whether or not the FUNCTION |
| window is displayed (ON or OFF). |
|
|
STATUS AUDIO | Selects whether or not the STATUS |
| AUDIO window is displayed (ON or |
| OFF). |
|
|
3 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.
The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.
4 Turn the MENU knob to select whether or not to display the selected window, then press the MENU knob.
The z mark changes to a b mark and the ? mark changes to a z mark.
5 To continue setting other windows, repeat steps 3 and 4.
6 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
7-2-9 Confirming the Image of the
Return Video Signal in the
Viewfinder
You can set whether or not the image of the return video signal input to the GENLOCK IN connector is displayed in the viewfinder, using the GENLOCK page of the MAINTENANCE menu.
Proceed as follows.
1 Set the MENU ON/OFF switch to ON while holding down the MENU knob.
The TOP menu appears.
2 Turn the MENU knob to move the b mark to “MAINTENANCE”, then press the MENU knob.
If this is the first time the MAINTENANCE menu has been displayed, the CONTENTS page of the MAINTENANCE menu appears.
If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “GENLOCK”, then press the MENU knob to display the GENLOCK page.
If a different page is displayed, turn the MENU knob until the GENLOCK page appears, then press the MENU knob to select the page.
|
|
|
|
|
|
|
| M15 | GENLOCK |
| TOP |
| |
| GENLOCK | : | ON |
| ||
| RETURN VIDEO | : | OFF |
| ||
| GL | H | PHASE | : | 0 |
|
| GL | SC | PHASE | : | 0 |
|
| GL | SC | 0/180 SEL | : | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Settings Detailed and Displays Menu 7 Chapter
129 | |
|
|