Sony PDW-510P, PDW-530, PDW-530P manual 196

Appendixes

No.	Page	Item	Settings	Default	Description
06	AUDIO-1	CA-701 AUDIO IN	ENABL/DSABL	ENABL	When a CA-701 camera adaptor is
					connected, selects whether or not to enable
					input of audio channels 3 and 4 from the
					camera adaptor.
					ENABL: Camera adaptor can be used.
					DSABL: Camera adaptor cannot be used.
		AUDIO CH3/4	CH1/2/SW	SW	Selects the sources to be recorded to
		MODE			channels CH-3/4.
					CH1/2: Same sources as CH-1/2.
					SW: Signals selected by the AUDIO IN CH-3/
					CH-4 switches.
		REAR XLR AUTO	OFF/ON	OFF	Turns the XLR connection automatic
					detection on or off.
		FRONT MIC REF	–60 dB/–50 dB/	–60 dB	Sets the reference level of the front
			–40 dB		microphone.
		REAR MIC REF	–60 dB/–50 dB/	–60 dB	Sets the reference level when the AUDIO IN
			–40 dB		CH1 connector is set to MIC.
		MIN ALARM VOL	OFF/SET	OFF	Volume of the monitor speaker alarm tone
					when it is turned all the way down.
					OFF: Almost inaudible.
					SET: Faintly audible.
		SP ATT LEVEL	OFF/3/6/9 dB	OFF	Lowers the volume of the monitor speaker.
					Has no effect on earphone volume.
		HEADPHONE OUT	STREO/MONO	MONO	Selects whether to make the rear earphone
					monaural or stereo.
07	AUDIO-2	AU DATA LEN (IMX)	16 bit//24 bit	16bit	Sets the bit length of the digital audio
		(PDW-530/530P			recording.
		only)
		AU REF LEVEL	–20 dB/–18 dB/	–20 dB	Sets the reference level (Head Room).
			–16 dB/–12 dB/
			EBUL
		AU REF OUT	EBUL/0 dB/+4 dB/	0 dB	Sets the output reference level.
			–3 dB
		AU CH12 AGC	MONO/STREO	MONO	Selects whether to perform automatic input
		MODE			level adjustment of analog audio signals to
					be recorded on channels 1 and 2
					independently for each channel, or in stereo
					mode.
		AU CH34 AGC	MONO/STREO/	MONO	Selects whether to perform automatic input
		MODE	OFF		level adjustment of analog audio signals to
					be recorded on channels 3 and 4
					independently for each channel, or in stereo
					mode, or not at all (OFF).
		AU AGC SPEC	–6/–9/–12/–15 dB	–6 dB	AGC saturation level setting
		AU LIMITER MODE	OFF/–6/–9/–12/	OFF	For manual audio input level adjustment,
			–15/–17 dB		selects the limiter saturation level for loud
					input signals.
		AU OUT LIMITER	OFF/ON	ON	Turns the audio output limiter on or off.
		i.LINK AUDIO OUT	2CH/4CH	2CH	2CH: Output channels 1 and 2 (16 bits, 48
					ksps)
					4CH: Output channels 1 to 4 (12 bits, 32
					ksps)

196 Menu List