Data Setting User Loading and Saving 8 Chapter
1 After displaying the SCENE FILE page (see page 150), turn the MENU knob to move the b mark to “SCENE RECALL”, and press the MENU knob.
A SCENE RECALL page appears.
2 Turn the MENU knob until the SCENE RECALL page which contains the desired scene files appears, then press the MENU knob.
3 Turn the MENU knob to move the b mark to “5FILE
LOAD b MEM
The message “RECALL OK? YES bNO” appears.
|
|
|
|
|
|
|
| P01 SCENE | RECALL | ESC |
| ||
| RECALL | OK? | YES | NO |
| |
| DISPLAY | MODE | : | ALL |
| |
| 001.SCENE1 |
|
|
|
| |
| 002.SCENE2 |
|
|
|
| |
| 003.NO FILE |
|
|
| ||
| 004.SCENE4 |
|
|
|
| |
| 005.SCENE5 |
|
|
|
| |
| ***.5FILE | LOAD |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 To carry out the recall, move the b mark to “YES” and press the MENU knob.
To cancel, press the MENU knob leaving the b mark pointing to “NO”.
When loading is complete, the message “COMPLETE” appears and the access indicator goes off.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
Notes
•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.
•To load the scene file saved in the camcorder memory when the “Memory Stick” is inserted, return to the P00 SCENE RECALL page and load the desired scene file in the camcorder memory.
•When there is no file to be loaded (shown as “NO FILE”), an existing file of the same number is unaffected. In the example shown in step 3, MEM(3) is not overwritten.
8-2-3 Resetting the Settings of the
Camcorder to the Standard
Settings Saved in the
Reference File
You can reset the settings of the camcorder to the settings saved in the reference file (standard settings).
For details about the items in the reference file, refer to the Maintenance Manual.
On the SCENE FILE page (see page 151), turn the MENU knob to move the b mark to “STANDARD”, and press the MENU knob.
F04 | SCENE FILE | TOP | |
s1 | :SCENE | 25 |
|
s2 | :SCENE | 26 |
|
s3 | :SCENE | 27 |
|
s4 | :SCENE | 28 |
|
s5 | :NO FILE |
|
|
xSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | SCENE21 |
|
|
The s displayed on the left of STANDARD changes to x. When x changes to s, the settings of the camcorder are reset to the settings saved in the reference file.
If you press the MENU knob again while x is displayed, the operation is cancelled and the camcorder returns to the settings before STANDARD was selected.
152