Load the clip list from the disc into the unit memory (see page 78).
To return to the
Press the THUMBNAIL button, turning off the indicator.
3 Turn the SEL/SET dial or the MENU knob to select the desired sub clip.
4 Hold down the SHIFT button, and press the SEL/SET dial or MENU knob.
The sub clip operation menu appears.
To return to the thumbnail display without moving the sub clip
Do either of the following.
•Turn the SEL/SET dial or the MENU knob to select EXIT, and press the dial/knob.
•Press the RESET button.
5 Turn the SEL/SET dial or the MENU knob to select MOVE, and press the dial/ knob.
The sub clip movement screen appears. The sub clip selected in step 3 appears surrounded by a frame.
Indicates that the third sub clip will be moved to the position of the eighth sub clip.
Cursor indicating the move destination for the selected sub clip
To return to the previous screen
Press the RESET button.
6 Turn the SEL/SET dial or the MENU knob to move the cursor to the position where you want to move the selected sub clip.
To return to the previous screen
Press the THUMBNAIL button.
7 Press the SEL/SET dial or the MENU knob.
The sub clip thumbnail display appears, and you can check the new position of the sub clip.
8 Save the current clip list to disc.
See
4-2-3 Trimming a Sub Clip
Proceed as follows.
Selection Scene 4 Chapter
75 | |
|
|