Controls and Parts of Functions and Locations 2 Chapter
eBack tally switch
This switch enables or disables the back tally and rear tally indicators.
ON: The back tally and rear tally indicators are enabled.
OFF: The back tally and rear tally indicators are disabled.
fMonochrome LCD
This shows the remaining battery capacity, remaining disc capacity, time data, and so on.
For details, see
gDISP SEL (display selection) switch This switches the display in the color LCD.
CHAR: Display video with superimposed text. With the MENU ON/OFF switch set to OFF, also display camcorder status indications similar to those displayed in the viewfinder (see
MONI: Display video without superimposed text.
STATUS: Display counter, warnings, and audio levels.
hColor LCD
This displays
For details, see
iWARNING indicator
This indicator lights up or flashes when there is a fault in the VDR.
For details, see
jACCESS indicator
This lights when data is written to or read from the disc.
kRear tally indicator
When the back tally switch is set to ON, this indicator has the same function as the tally indicator.
lLCD switch
This controls the backlights of the color LCD and the monochrome LCD.
OFF: The color LCD is turned off (the backlight of the monochrome LCD is off).
L:The color LCD is adjusted for viewing indoors (the backlight of the monochrome LCD is on).
H:The color LCD is adjusted for viewing outdoors (the backlight of the monochrome LCD is on).
2-9 Warnings and
Indications on the
LCDs
2-9-1 Monochrome LCD
Disc status and battery status
Disc status indicator
Full capacity is available.
Close to full state: “DISC” flashes. Full (disc must be replaced): “DISC” and “E” flash.
Battery status indicator
Fully charged
Nearly dead: “BATT” flashes. Dead battery (battery must be charged): “BATT” and “E” flash.
Display of remaining disc capacity and remaining battery capacity on
the monochrome LCD
32