Settings Detailed and Displays Menu 7 Chapter
2 Turn the MENU knob to move the b mark to “OPERATION”, then press the MENU knob.
If this is the first time the OPERATION menu has been displayed, the CONTENTS page appears. If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to POWER SAVE, then press the MENU knob.
If a different page is displayed, turn the MENU knob until the POWER SAVE page appears, then press the MENU knob.
The POWER SAVE page appears. The current settings appear on the right side of each item.
04 POWER | SAVE |
| TOP |
i.LINK OUT |
| : | DSABL |
REC AUDIO | OUT | : | EE |
NETWORK/THUMB | : | SAVE |
Item | Setting |
|
|
i.LINK OUT | Enable or disable i.LINK (AV/C) OUT. |
|
|
REC AUDIO OUT | Select whether to output |
| or no audio from the AUDIO OUT |
| connector during recording. |
|
|
NETWORK/ | Select whether to permanently enable |
THUMB | the |
| display, or to disable them in power |
| saving mode. |
|
|
4 Move the b mark to “i.LINK OUT”, then press the MENU knob.
The b mark changes to a z mark, and the z mark changes to a ? mark.
5 Turn the MENU knob to select “ENABL”, then press the MENU knob.
The setting is confirmed. The z mark changes to a b mark and the ? mark changes to a z mark.
6 To end the menu operation, set the MENU ON/OFF switch to OFF.
7-3-3 Setting the Color Temperature Manually
You can adjust the value of the white balance manually by setting the color temperature.
Proceed as follows.
1 Holding down the MENU knob, move the MENU ON/ OFF switch to ON.
The TOP menu appears.
2 Turn the MENU knob to move the b mark to “PAINT”, and press the MENU knob.
If this is the first time the PAINT menu has been displayed, the CONTENTS page appears. If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “WHITE”, and press the MENU knob to display the WHITE page.
If a different page is displayed, turn the MENU knob until the WHITE page appears, and press the MENU knob to select the page.
|
|
|
|
|
|
|
| P02 WHITE |
|
|
| ||
| COLOR | TEMP | <A>: | 3200 |
| |
| COLOR | FINE | <A>: | 0 |
| |
| R | GAIN |
| <A>: | 0 |
|
| B | GAIN |
| <A>: | 0 |
|
| D5600K |
| <A>: | OFF |
| |
| COLOR | TEMP | <B>: | 3200 |
| |
| COLOR | FINE | <B>: | 0 |
| |
| R | GAIN |
| <B>: | 0 |
|
| B | GAIN |
| <B>: | 0 |
|
| D5600K |
| : | OFF |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Item | Description |
|
|
COLOR TEMP | Sets the color temperature for the |
<A> | desired value. Adjust the value while |
| looking at the real image because error |
| tends to be bigger for adjustment of |
| high color temperature. |
|
|
COLOR FINE <A> | Adjusts the value more precisely when |
| the color temperature adjustment |
| through COLOR TEMP is not |
| satisfactory. |
|
|
R GAIN <A> | Only the value of R GAIN is changed. |
|
|
B GAIN <A> | Only the value of B GAIN is changed. |
|
|
D5600K | Sets the color temperature to |
| approximately 5600 K. |
|
|
The above table shows the adjustment of the white balance of channel A.
Items followed by “<B>” are used to adjust the white balance of channel B.
4 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.
The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.
5 Turn the MENU knob to change the setting, and press the MENU knob.
132