5 Turn the MENU knob to change the setting of the selected item or to display the desired value, and press the MENU knob.
The z mark changes to a b mark and the ? mark changes to a z mark.
6 To end the menu operation, set the MENU ON/OFF switch to OFF.
Additional information related to the UMID
COUNTRY CODE
When you select this item, the COUNTRY CODE window appears.
22 UMID | SET | TOP |
COUNTRY | CODE | : sss |
ORGANIZATION | : sssss | |
USER CODE | : sssss |
TIME ZONE : 1B :
INS DEL RET | ESC END |
Enter an abbreviated alphanumeric string
There are about 240 country codes.
Find your own country code on the following home page.
Refer to
When the country code is less than 4 bytes, the active part of the code will occupy the first part of the
Example: In the case of Japan
For Japan, if the country code is JP, it is 2 bytes, if JPN, it is 3 bytes.
Thus, enter the following: JP_ _
or JPN _
where _ represents a space.
ORGANIZATION (organization code)
When you select this item, the ORGANIZATION window appears.
(Refer to the COUNTRY CODE window above.) Enter an abbreviated
Note
There are no problems in recording or playing back audio- video signals,if ORGANIZATION is not set. Organization codes must be acquired by applying to the SMPTE registration office. When no organization code
has been acquired, it is forbidden to enter an arbitrary string. As a rule, the code “00” must be entered. Freelance operators who do not belong to an origination should enter “~”.
USER CODE
When you select this item, the USER CODE window appears.
(Refer to the COUNTRY CODE window above.) Enter the
The user code is registered with each organization locally. It is usually not centrally registered.
When the user code is less than 4 bytes, enter the user code from the beginning of the 4 bytes and enter the space character (20h) in the remaining strings.
This user code is determined by the organization. The methods used depend on the organization.
Note
User bits cannot be entered when no organization code has been entered.
TIME ZONE
When you select this item, the TIME ZONE window appears.
The UTC is calculated based on the local time, using the time zone. If the time zone is not set, the UTC is not recorded correctly.
TIME ZONE ESC
00.UTC GREENWICH
Set the time difference from UTC. When setting the summer time or daylight savings time, change the code to one which will advance the time by 1 hour.
Note
When you change the time zone, adjust the
7-3-11 Making Network Settings
The NETWORK page of the MAINTENANCE menu allows you to make settings for connections to other DV devices via a network.
Settings Detailed and Displays Menu 7 Chapter
141 | |
|
|