10Repeat steps 3 to 6 to set the default gateway.
11To end the menu operation, set the MENU ON/OFF switch to OFF.
Setting the communications speedSet the communications speed by choosing AUTO, 10Mbps, or 100Mbps from the menu.
The factory default setting is “AUTO”. Proceed as follows.
1 Carry out steps 1 to 3 in “Enabling automatic acquisition of the IP address” (page 142) to display the NETWORK page of the MAINTENANCE menu.
2 Turn the MENU knob to move the b mark to “LINK SPEED”, then press the MENU knob.
3 Turn the MENU knob to move the b mark to the desired value, then press the MENU knob.
4 To end the menu operation, set the MENU ON/OFF switch to OFF.
Setting the communications mode (full duplex or half duplex)Set the communications speed by choosing AUTO, FULL (full duplex) or HALF (half duplex) from the menu.
The factory default setting is “AUTO”. Proceed as follows.
1 Carry out steps 1 to 3 in “Enabling automatic acquisition of the IP address” (page 142) to display the NETWORK page of the MAINTENANCE menu.
2 Turn the MENU knob to move the b mark to
“DUPLEX”, then press the MENU knob.
3 Turn the MENU knob to move the b mark to the desired mode, then press the MENU knob.
4 To end the menu operation, set the MENU ON/OFF switch to OFF.
7-4 Resetting USER
Menu Settings to the
Standard Settings
You can return all settings in the USER menu to the standard settings. It is also possible to change the standard settings from their factory default values.
For details on how to change the factory settings, refer to the Maintenance Manual.
Proceed as follows.
1 Set the MENU ON/OFF switch to ON.
The last accessed menu appears on the screen.
2 Turn the MENU knob until the USER FILE page appears, and press the MENU knob.
The USER FILE page appears.
U16USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID : sssssssssssssssss
USER PRESET | : | EXEC |
USER FILE page
3 Turn the MENU knob to move the b mark to “USER PRESET”, and press the MENU knob.
The message “LOAD OK? YES b NO” appears.
|
|
|
|
|
|
|
| U16 | USER | FILE |
|
|
|
| LOAD | OK? |
| YES | NO |
|
| USER | FILE | LOAD | : | EXEC |
|
| USER | FILE | SAVE | : | EXEC |
|
| F.ID | : sssssssssssssssss |
| |||
| USER | PRESET | : | EXEC |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Turn the MENU knob to move the b mark to”YES”, and press the MENU knob.
The settings for all items in the USER menu are reset to the standard settings.
Settings Detailed and Displays Menu 7 Chapter