In the TOP menu, select “OPERATION”.
Insert a memory card into the PC card slot.

next section “To copy proxy data for all clips on the disc to a memory card”, and copy the data that could not be recorded.

•It is not possible to record only proxy data to a memory card without recording to the disc.

To stop recording

Recording to memory cards stops when recording to the disc stops.

You do not need to take any special steps to stop recording to memory cards.

To delete recorded proxy data

To delete material recorded on a disc and proxy data recorded on a memory card at the same time, execute DELETE LAST CLIP, DELETE ALL CLIPS, or QUICK FORMAT on the DISC page of the MAINTENANCE menu (see page 201).

To delete only proxy data on a memory card, carry out the steps in “To delete all proxy data in a memory card” (page 59).

To copy proxy data for selected clips on the disc to a memory card

To select clips on the disc and copy proxy data to a memory card, one clip at a time, proceed as follows.

1

2 Search for the video of the clip that you want to copy.

(The camcorder can be either playing or stopped.)

3

4 Turn the MENU knob to scroll to the MEMORY REC page. Alternatively, select “MEMORY REC” on the CONTENTS page.

The MEMORY REC page appears.

24 MEMORY REC

 

TOP

COPY CURRENT CLP : EXEC

COPY

ALL CLIPS

:

EXEC

ABORT

COPY

:

EXEC

DEL ALL

MEM CLP

:

EXEC

FORMAT

MEMORY

:

EXEC

5 Select “COPY CURRENT CLP” with the MENU knob and then press the MENU knob.

The message “EXECUTE OK?” appears.

6 Select YES to execute the copy.

Proxy data for the playing or stopped clip is copied to the memory card.

During the copy, the message “MEMORY ACCESS **%” (where ** is a progress percentage number from 0 to 99) appears in the viewfinder and color LCD.

To copy proxy data for all clips on the disc to a memory card

To copy proxy data to a memory card for all clips on the disc, proceed as follows..

1 Insert a memory card into the PC card slot.

2 Insert the disc that you want to copy into the camcorder.

3 On the MEMORY REC page of the OPERATION menu (see page 59), select “COPY ALL CLIPS” and then press the MENU knob.

The message “EXECUTE OK?” appears.

4 Select YES to execute the copy.

Proxy data for all clip on the disc is copied to the memory card.

During the copy, the message “MEMORY ACCESS **%” (where ** is a progress percentage number from 0 to 99) appears in the viewfinder and color LCD.

Notes

•No DV stream is output from the camcorder’s i.LINK DV IN/OUT S400 connector while proxy data is being copied from a disc to a memory card.

•The message “MEMORY CARD ERROR!” appears if a

copy is attempted while the unusable memory symbol (see page 60) is visible in the viewfinder.

When there is not enough free memory

The message “M. shortage” appears when the amount to data to copy is greater than the amount of remaining memory, and the message “MEMORY CARD FULL!” appears when there is no remaining memory. The copy cannot be executed if either of these messages appears. Insert another memory card.

To cancel a copy to a memory card

Proceed as follows.

1 On the MEMORY REC page of the OPERATION menu (see page 59), select “ABORT COPY”.

The message “EXECUTE OK?” appears.

2 Select YES to cancel the copy.

The copy is cancelled.

To delete all proxy data in a memory card

Proceed as follows.

Playback and Recording 3 Chapter

3-2 Recording 59