Fuji.MXF
Sakura.SMI
To check clip names
Press the THUMBNAIL button to display the thumbnail screen, and select the clip whose name you want to check. The name of the selected clip appears in the upper left of the screen.
See “Cuing up with sub clip thumbnails” (page 64) for more information about the thumbnail screen
Notes
•The item at the upper left of the screen is displayed according to the following order of priority.
Title >
Therefore, the display of this item changes as following, depending on whether there is a title.
When a title has been set as a clip name on this unit, for clips recorded on this unit, the title is displayed.
The
•If the firmware of your XDCAM device is version 1.4x or lower, clips with
To check clip information (name, title, etc.) in the CLIP STATUS menu
1 Holding down the MENU knob, move the MENU ON/ OFF switch from OFF to ON.
The TOP menu appears.
2 Turn the MENU knob to select “DIAGNOSIS”, and press the MENU knob.
If this is the first time the DIAGNOSIS menu has been displayed, the CONTENTS page of the DIAGNOSIS menu appears. If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “CLIP STATUS”, and press the MENU knob.
If a different page is displayed, turn the MENU knob to scroll the screen to “CLIP STATUS”, and then press the MENU knob.
The CLIP STATUS page appears. The current settings of the items on the page appear to the right of the items.
|
|
|
|
|
|
|
|
| D08 | CLIP STATUS | TOP |
|
| ||
| CLIP NO |
| : | 001/010 |
|
|
|
| NAME : |
|
| C0001 |
|
|
|
| TITLE: |
|
| (no name) |
|
|
|
| RECORD | DEVICE: |
|
|
| ||
|
| SERIAL: | 10001 |
|
|
| |
|
| DATE | : | 08/01/06 |
|
|
|
|
| TIME | : | 19:54:38 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-2-10 Recording in Live Logging Mode 1)
1) This is supported from firmware version 1.4 and
Live logging is a function that allows you to simultaneously transfer logging data as you record live material.
You can install the optional
•View proxy AV data.
•Add and modify metadata (titles, comments, essence marks, etc.).
•Create clip lists.
After adding or modifying metadata and clip lists, you can transfer them from the computer back to the camcorder for recording on the original disc.
Refer to the
To record in live logging mode
With the optional
1 Use an Ethernet cable to connect the camcorder to a computer with
2 In the TOP menu, select “OPERATION”.
Playback and Recording 3 Chapter